8
In the event of a breakdown
191
208_en_Chap08_cas-de-panne_ed01-2016
F Place the foot of the jack 2 on the ground
and ensure that it is directly below the
front A or rear B jacking point provided on
the underbody, whichever is closest to the
wheel to be changed.
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake.
Switch off the ignition.
With a manual gearbox, engage first
gear to block the wheels.
With an electronic gearbox, place the
lever in position R to block the wheels.
With an automatic gearbox, place the
lever in position P to block the wheels.
Check that the parking brake warning
lamps in the instrument panel come on.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
F Remove the bolt cover from each of
the bolts using the tool 3 (according to
equipment).
F Fit the security socket 4 on the wheelbrace 1
to slacken the security bolt (if fitted).
F Slacken the other bolts using the
wheelbrace 1 only.
Never use:
- the jack for any other purpose than
raising the vehicle,
- a jack other than the one provided
by the manufacturer.
List of operations
To Next Page
Loading...
Need help?
General
