83
3
Ease of use and comfort
Automatic air conditioning
1. Temperature adjustment
2. Air flow adjustment
3. Air distribution adjustment
4. Intake of exterior air / Recirculation of
interior air
5. Air conditioning On / Off
Automatic operation
F Set the temperature control dial 1 to the
temperature required.
F Place the air flow control dial 2 in the
"AUTO" position.
F Place the air distribution adjustment
dial 3 in the "AUTO" position.
When the engine is cold, to avoid an
excessive distribution of cold air, the
ventilation will reach its optimum level
gradually.
On entering the vehicle, the interior
temperature may be much colder
(or warmer) than the temperature
setting. There is no need to change the
temperature setting in order to reach
the comfort required rapidly.
The automatic regulation of the air
conditioning will operate to correct the
temperature difference as quickly as
possible.
In automatic mode:
F when the temperature is set to maximum
(Rapid heating), the intake of exterior air is
activated and the air conditioning stops.
F when the temperature is set to minimum
(Rapid cooling), air recirculation is
activated and the air conditioning operates.
The system controls the air distribution, the flow,
the temperature and the air intake to ensure
the level of comfort selected and adequate air
circulation in the passenger compartment. No
further action on your part is required.
To Next Page
Loading...
Need help?
General
