PRACTICAL INFORMATION
Bolt covers
Alloy wheel bolts are covered by
chrome trims.
Use the yellow tool to remove the trims
before slackening the bolts.
Fitting the spare wheel
If your vehicle is fi tted with a steel spare
wheel, when fi tting it, it is normal when
tightening the bolts to notice that the
washers do not come into contact with
the rim. The spare wheel is secured by
the cone shape of each bolt.
VERY COLD CLIMATE SCREEN *
The very cold climate screen is a partial
removable cover which is clipped onto
the air intake grille to prevent the accu-
mulation of snow due to direct splashes.
Once it has been fi tted on your vehi-
cle, it is imperative that it is removed
when the ambient temperature condi-
tions rise above 10 °C again.
Consult a PEUGEOT dealer.
Tyres of size 215/55 R17 can-
not be fi tted with standard snow
chains, contact a PEUGEOT
dealer.
Special features of alloy
wheels
Anti-theft bolts
Your wheels are fi tted with anti-theft
bolts (one per wheel), placed under
chrome trims which must be removed
using the yellow tool, before the bolts
are unscrewed using the anti-theft
socket and the wheel brace 1 .
Fitting snow tyres
If you fi t snow tyres mounted on steel
wheels onto your vehicle, it is essen-
tial to use special bolts available from
your PEUGEOT dealer.
This anti-theft socket was
given to you on delivery of
your vehicle with the duplicate
keys. Make a careful note of
the code number engraved on the
head of the anti-theft socket. This will
enable you to obtain a duplicate anti-
theft socket from a PEUGEOT dealer.
You are advised to do the same for the
duplicate keys.
To Next Page
Loading...
Need help?
General
