Need help?Do you have a question about the PEUGEOT Geopolis 250 and is the answer not in the manual?
General| Displacement | 244.3 cc |
|---|---|
| Cooling System | Liquid cooled |
| Transmission | Automatic CVT |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shock absorbers |
| Engine Type | Single cylinder, 4-stroke |
| Front Tire | 120/70-15 |
| Power | 22.5 hp |
Details of the engine type, cooling, bore, stroke, capacity, power, torque, and fuel supply.
Specifications for fuel tank, engine oil, relay box, coolant, and fork oil.
Information on the chassis type, front and rear suspension, and travel.
Procedure for accessing and interpreting fault codes from the ECU.
Detailed steps for preparing a non-maintenance-free battery for use.
Final inspection checklist before delivering the vehicle to the owner.
Torque specifications for various engine components during assembly or maintenance.
Wiring diagram illustrating the electrical connections of the injection system.
Layout of the fuse box and how electrical energy is distributed to components.
Detailed procedure for performing engine oil and filter changes.
Procedure for removing and replacing the vehicle's spark plug.
Instructions for replacing the transmission rollers and drive belt.
Steps for adjusting the engine valve clearances to the correct specifications.
Procedure for removing the ABS/PBS system's brake modulator unit.
Steps to safely reduce pressure within the fuel system before maintenance.
Procedure for removing the cylinder head from the engine.
Steps for removing the cylinder and piston components.
Instructions for replacing the bearings in the steering system.
To Next Page
