47
Check:
● Set the needle thread tension at "5".
● Set stitch pattern "03" for zigzag and the stitch width at "6.0".
● Set the stitch length at "2.0".
● Place a piece of fabric under the zigzag foot and sew.
● Select stitch pattern "01" for straight stitch and set the stitch length at "2.5".
● Sew with straight stitch.
Adjustment:
● First turn milled nut 57 fully to the left (fig. 51).
● Set zigzag stitch "03", stitch width "6.0", and stitch length "2.0".
● Sew with zigzag stitch.
● At the same time turn the milled nut gradually in clockwise direction, until the knot is formed in the
center of the fabric (fig. 47).
Cross-check:
● Sew with straight stitch and zigzag stitch as described under "Check".
To Next Page
Loading...
