Pfaff expression 2034 - Presser Foot and Needle Tension Adjustment; Changing Presser Feet and Setting Needle Tension

I
I
I
j
I
j
j
j
I
I
I
I
R
Removing
the
presser
foot
Switch
off
the master
switch
Press
the front
part of
the presser
foot upwards
and at the
same
time the
rear
part downwards
until it disengages
from
the
presser
foot holder
(30).
:1
A
Attaching
the
presser
foot
Place the
presser foot
under the presser
foot holder
(30), so
that when
the
presser
foot
lifter (51)
is lowered, the
pins
of
the foot engage
in the
presser
foot holder.
1 pFAFF
Setting
the needle
thread tension
Set
the required
amount
of the
needle thread
tension (35)
using the
markings
on the tension
dial.
The
normal
setting
for
sewing
is 4 - 5.
For
decorative
sewing,
darning
and buttonhole
sewing
3.
Check:
Please
check
that
the
presser foot
is
properly
attached by
raising
the
presser
foot lifter.
29
I