Pfaff tiptronic 2040 User Manual

Notes on safety for domestic
sewing
machines in accordance
with
EN 60335-2-28 and/or
IEC 335-2-28
1. The
user must exercise adequate
caution with regard
to the up and down movement of
the
needle and constantly
observe
the
sewing
area
while
working.
2.
When
leaving the machine, during maintenance work or when changing mechanical
parts
or accessories, always disconnect the machine from the mains
by
pulling out
the
mains
plug.
3. The
maximum permissable wattage for the sewing
lamp
is 1
5
watts.
4.
The tension
of the drive belt may only be adjusted
by a
PFAFF
mechanic.
5. The
machine is to be put into
operation according
to
the indications
on the specification plate.
6.
Do not
place any objects in openings on the machine.
7. Do
not use
the sewing machine if:
— there
is visible damage
— its
function is
disturbed
— it
is wet, e.g.
with condensation, that may
be caused by
introducing
a cold
machine
into a
warm room.
8.
Do
not
pull the mains plug
out
of
the
socket
by
its cord.
9.
No
liability will be accepted for any damage caused if this machine is
used
forany
purpose
other than that for which it is intended or if it is operated incorrectly.
I
0.To
avoid the
risk
of
electric
shock, do not
open
the machine. There are no parts inside
the
machine which the user can repair. This is solely the responsibility
of
our
qualified
service staff.
I
1.Only original PFAFF
parts
may be used.
I
2.The
machine is
designed
for a mains supply with a mains rated voltage
of
+7- 10% and
a
rated
frequency of +1— 4%.
I
3.
During
conventional use, the outer parts of a non-electrically driven
foot control can heat
up to
85°C.
Constant
use at
low
speeds
is not permissible,
in
order
to avoid damage due
to
over-heating.
14. According to the laws concerning electromagnetic compatibility,
no
liability can
be
accepted
for any mains interruptions caused, should the mains power
line be
changed
or
should changes be made to it.
Environment
he
recommended
environment
is:
mbient
temperature 1
0°C to
40°C
Jr
humidity 20% to 80%.
loom
temperature
— 25°C to
+
60°C
he
machine is suppressed and insensitive to interference according
to
international
conven
ons;
however, it should not
be
operated in the direct vicinity
of electronic devices.
his sewing
machine
is a
high-quality
electronic-mechanical appliance; it is
a
machine for
upervised use
in the home. It should
be
operated in
such a way that it is not subjected to:
ust,
severe dampness, direct sunlight, static electricity, heat-producing
objects,
corrosive
hemicals or
liquids.
he
machine is to
be
used on a firm and even surface which is
open for ventilation purposes.
reatment
Iways
protect the machine against damage which could
be
caused
by it being
hit
or
dropped.
leaning
ousing
and display: To clean the housing use a dry, clean, soft,
lint-free cloth. To remove
ny stubborn dirt,
use
a soft cloth moistened with alcohol.
lease
note!
o
not
use
any insecticides or chemical products such
as
petrol or liquid
chemicals to clean
e
housing.

Pfaff tiptronic 2040 Specifications

General

Brand	Pfaff
Model	tiptronic 2040
Category	Sewing Machine
Language	English