Need help?Do you have a question about the Pfeiffer DCU 200 DCU 300 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Protection Category | IP 40 |
| Category | Monitor |
| Display | Graphical display |
| Communication Interfaces | RS-485 |
| Outputs | Relay |
| Operating Temperature | 0 to 50 °C |
| Dimensions | 144 x 144 x 100 mm |
| Compatible Gauges | Pirani gauges, cold cathode gauges, full range gauges |
Defines the intended use of the DCU with PFEIFFER Electronic Drive Units and adherence to instructions.
Specifies uses not covered or permitted, warning about consequences like loss of warranty.
Details the components and elements found on the front panel of the DCU unit.
Illustrates and describes the connections and components located on the rear panel of the DCU.
Covers essential preparation steps before installing the DCU, including safety warnings and ambient conditions.
Explains general error codes (Errxxx, Exxx) and warnings (Wrnxxx, Fxxx) and their impact on the unit.
Lists common errors that can occur during self-testing, their display codes, and recommended actions.
To Next Page
