12
Out Of Range
1. If headset and phone are separated by
more than 10 meters (33 feet), they will
disconnect. The headset will alert you by
playing the out of range tones and then
say “Disconnected” once the connection
is terminated.
2. In case headset and phone do not auto-
matically reconnect once back in range,
briefly press the middle button on the
control unit to manually reconnect. You
can also use manual reconnect to abort
pairing mode and connect to the last
connected device.
3. While you are in multi connection mode,
a device which goes out of range, will
lose connection. The headset will notify
you by playing the out of range tones.
The headset will keep trying to connect
to the lost device and notifying you. You
need to turn the headset o and back on
to stop the headset from attempting to
reconnect to the lost device. Alternatively,
you can turn o Bluetooth on the left
behind device.
4. In case you intentionally switched o the
Bluetooth function on a single connected
device and hear the “Disconnected” mes-
sage, you can immediately go to the Blue-
To Next Page
Loading...
