9
Additional Pairing Notes
1. If asked for the Pass/PIN code, please
enter “0000” or “1234”. Newer phones do
not require this.
2. Some phones may ask permission to ac-
cess the phone contact list. If you receive
this message on your phone, please select
“OK” or “allow access”.
3. The headset will automatically turn o if
not paired within 15 minutes.
Manual Pairing, Pairing with a
second device or Re-Pairing:
1. Simultaneously press and hold all 3
buttons on the control-unit for 3 seconds
while the headset is turned On. You will
hear the pairing tones and the audio
message “Disconnected” (The original
connection will be lost while in pairing
mode).
2. Search the Bluetooth menu of your
device for “BHS-730” and complete above
regular pairing steps until successfully
connected.
To Next Page
Loading...
