10
Additional Pairing Notes
1. If asked for the Pass/PIN code, please
enter “0000”. Newer phones do not
require this.
2. The headset will automatically turn o if
not paired within 5 minutes.
Manual Pairing, Pairing with a
second device or Re-Pairing:
1. Simultaneously press and hold all 3
buttons on the right earpiece for 3
seconds while the headset is turned On.
You will hear the audio message
“Disconnected” (The original connection
will be lost while in pairing mode).
2. Search the Bluetooth menu of your
device for “BHS-530” and complete
above regular pairing steps until
successfully connected.
3. To
delete all pairings from the headset,
press and hold all 3 buttons on the right
earpiece for 10 seconds until you hear the
low tone confirmation.
To Next Page
Loading...
