14
ON / OFF-Function
Keep the call button on the right earphone
pressed for 3 seconds to turn the headset
On. You will hear the audio message “Power
On”. You will see the indicator LED turn Blue
for a short time, then turn o if automatically
reconnected to your phone or stay Blue
while in pairing mode.
To turn o the headset, press and hold the
call button on the right earphone for 4
seconds until you hear the “Power O”
message. The indicator LED will turn Red
and then shut o.
If you leave your earbuds powered On and
walk away from them until they disconnect,
they will automatically power down after 5
minutes.
Resetting the headset
In case you experience problems with
Pairing or issues with volume control,
resetting the headset may help: while not in
playback, press and hold all 3 control
buttons for about 10s until you hear a low
beep tone.
To Next Page
Loading...
