15|
ton to manually reconnect. You can
also use this function to abort
pairing mode and connect to the
last connected device.
3. While you are in multi connection
mode, a device which goes out of
range, will lose connection. The
headset will keep trying to connect
to the lost device for 2 minutes.
4. In case you intentionally switched
o the Bluetooth function on a
single connected device and hear
the “Disconnected” message, you
can immediately go to the Blue-
tooth menu of your other device
(phone or tablet) to connect the
headset by using the regular pairing
steps described earlier. The headset
will become visible to other devices
as soon as all connections are drop-
ped or it’s forced to pairing mode
by pressing and holding all three
buttons at the same time for 3s.
To Next Page
Loading...
