|16
RESETTING THE HEADSET
In case you experience problems with
Pairing or issues with volume control,
resetting the headset may help. While
not in playback, press and hold all
three buttons for 10s until you hear a
low beep tone.
ANSWERING CALLS
As soon as you have an incoming
call, the headset will read the phone
number of the caller to you. To ans-
wer, briefly press the middle control
button. The call will be transferred to
your headset if not set dierently in
your phone.
In case you don‘t hear the caller‘s
voice on your headset, but the call is
connected, you may Transfer Audio to
the headset by keeping the middle
and upper button pressed at the same
time until you hear a short beep. To
switch audio from the headset to your
To Next Page
Loading...
