Phanteks METALLICGEAR NEO-6 - Hardware Installation Guide; Motherboard and Power Supply Installation; Storage Drive Installation (SSD;HDD); Front I;O Cable Connections

Connect to
Power Supply
Motherboard header:
9x
4x
4x
Supports:
*E-ATX, ATX, m-ATX, ITX
(*E-ATX up to 280mm width)
Use the velcro straps and zip ties to
tighten the cables.
HARDWARE INSTALLATION
MOTHERBOARD
POWER SUPPLY
SSD HDD
FRONT I/O CABLES CABLE MANAGEMENT
Remove the SSD
bracket first.
3
1
2
Power LED
Reset SW
HD
AUDIO
USB 3.0
Power SW
Connect to
Motherboard
NEO-G/Air only
NEO Silent/Air only
NEO Silent only
POWER
LED
POWER
SWITCH
NOT USED
HDD
LED
RESET
SWITCH