28
INSTALLING LED COVERS
Option 1: Default
The rst option covers a bit more of the cables attached to
the motherboard, and is a great t for standard sized ATX
motherboards.
The motherboard cover can be installed in two ways:
01
INSTALL MOTHERBOARD COVER
Option 2: Reversed
For the second option, the cover is installed in reversed position.
This covers less of the motherboard and allows more clearance
for E-ATX motherboards (up to 277 mm).
Option 3: Remove Cover
For even larger motherboards and maximum clearance, it is recommended to remove this cover completely.
E-ATX (up to 277 mm)
ATX
To Next Page
Loading...
