Need help?Do you have a question about the Phanteks NV7 and is the answer not in the manual?
General| Type | Mid Tower |
|---|---|
| Motherboard Support | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Material | Steel, Tempered Glass |
| Expansion Slots | 7 |
| PSU Support | ATX |
| Maximum CPU Cooler Height | 185 mm |
| Radiator Support - Top | Up to 360 mm |
| Radiator Support - Side | Up to 360 mm |
| Radiator Support - Bottom | Up to 360 mm |
| Radiator Support - Rear | 120mm |
| Fan Support - Rear | 1x 120 mm |
| Drive Bays | 2 x 3.5", 4 x 2.5" |
| Front I/O Ports | 2 x USB 3.0, 1 x USB Type-C, Audio In/Out |
| Fan Support - Top | 3x 120 mm |
| Fan Support - Bottom | 3x 120 mm |
| Maximum GPU Length | 450 mm |
| Fan Support - Side | 3 x 120 mm |
Overview of the Phanteks NV7 as a showcase full-tower chassis with a clean look and premium build quality.
Explains how to control Digital-RGB lighting using buttons on the chassis, detailing various modes.
Lists and labels all components of the PC chassis for easy identification during assembly.
Details the GPU support bracket and airflow cover included in the accessory box.
Lists various types of screws and other included accessories like cables and manual.
Provides dimensions, form factor, materials, motherboard support, and component clearance details.
Specifies fan and radiator mounting options for different chassis locations (side, top, bottom, rear).
Steps to detach the rear door, left glass side panel, and front glass panel from the chassis.
Instructions for removing the top panel, right side panel, and rear door.
Guide to remove the D-RGB cover by sliding it towards the front of the chassis.
Steps to unscrew and push down the motherboard cover to remove it.
Instructions for aligning the motherboard with the chassis screw holes and securing it.
Guide to inserting the power supply unit into the chassis and securing it with screws.
Details supported radiator and fan sizes for side, top, bottom, and rear mounts.
Diagram and explanation of airflow direction for air-cooled builds.
Diagram and explanation of airflow direction for water-cooled builds.
Steps to remove, install fans/radiator, and re-install the side bracket.
Guide to install fans or radiators onto the bottom bracket, including angled fan positioning.
Guide for installing up to 2x 120 fans or a 240 radiator in the rear of the chassis.
Guide for installing up to 3x 120 fans or a 360 radiator directly into the top of the chassis.
Instructions for connecting the power switch module and power LED to the motherboard header.
Information on USB, audio ports and their connection to the motherboard for front I/O.
Detailed guide on how to move the front I/O unit to the rear of the chassis for cable management.
Details the D-RGB controller, its ports, SATA connections, and motherboard synchronization options.
Guide to open the top door and install up to 2x 2.5" drives using SSD screws.
Explains three storage options for the bottom door: 1x 3.5"+4x 2.5", 4x 2.5", or 2x 3.5".
Instructions for routing CPU & MB cables to manage excessive cable length using the top cover door.
Describes default and reversed positions for the motherboard cover, and when to remove it.
Guide to align and slide the D-RGB cover to the rear of the chassis and secure it.
Guide to install the GPU support bracket, adjust its height, and secure its depth for GPU support.
Explains cable lanes, velcro ties, rear combs, and bottom grommets for managing external cables.
Contact info for RMA/technical support and warranty duration for different components.
Key safety advice for placement, electrical safety, handling glass, and general precautions.
To Next Page
