24
D-RGB CABLES
D-RGB CONTROLLER
The built-in D-RGB controller has 2 channels (A & B). Both
channels, each with 2 available D-RGB ports, can be controlled
seperately with the control buttons on the front I/O.
max 7A per channel, max 4A per port
LIGHTING EFFECTS & CONTROLS
D-RGB Lighting effects and control instructions are described
on page 6.
Connect the 2x SATA cables to the power supply.
The D-RGB to motherboard cable is included in the accessory
box.
sync lighting to
the motherboard
To Phanteks Digital-RGB products (JST connector)
02
EXPAND WITH OTHER D-RGB PRODUCTS
01
CONNECT THE SATA CABLES
03
SYNC LIGHTING TO MOTHERBOARD (OPTIONAL)
CHANNEL A PORTS
TO SATA PSU
TO TOP IO PANEL
CHANNEL B PORTS
SYNC TO MOTHERBOARD
channel A
SATA
channel B
SATA
To Next Page
Loading...
