Phanteks NV7 - Installing Optional GPU Support Bracket; GPU Support Bracket Installation

30
INSTALLING GPU SUPPORT BRACKET (OPTIONAL)
Install the GPU support bracket on the
motherboard cover with 1x thumb screw.
Adjust the depth of the bracket to hold
the GPU tightly and lock with 1x thumb
screw underneath the bracket.
Adjust to the correct height for your GPU
and use the thumb screw to secure it.
INSTALL BRACKET ADJUST HEIGHT
01 02
ADJUST DEPTH
03
adjust height and
lock with this thumb
screw
adjust depth and lock
with this thumb screw
Use the tie point on the bracket
to tie down GPU cable for a clean
routing
PRO TIP
THUMB SCREW 2x
INSTALL