31
EXTERNAL CABLE MANAGEMENT
External cables can be managed with the
cable lanes behind the rear door. The left lane
is larger and can be used for thick cables. The
other three lanes are smaller and made for thin
cables.
Use the velcro tie on the bottom to tie all
cables down to the chassis.
There are two options for the cables to leave
the case:
Option 1: Rear comb
The rear comb can be used to seperate each
cable to leave the case neatly.
Option 2: Bottom grommet
Alternatively, the grommet on the bottom of
the chassis can be used to lead the cables out.
Large lane for PSU power cable
Small lanes for thin cables
velcro tie
CABLE LANES VELCRO TIE COMB OR GROMMET
To Next Page
Loading...
