17
FAN & RADIATOR INSTALLATION
Remove the bracket by pulling the
handle at the top of the bracket and take
it out.
Remove the screw located on the top.
Install up to 4x 120 fans/360 radiator on
the bracket.
Re-install the bracket and secure it with
the screw located on the top.
Use the 3 cut-outs to route all fan cables.
SIDE FAN/RADIATOR BRACKET
02 PULL & TAKE OUT BRACKET
01 REMOVE SCREW
03 INSTALL FANS/RADIATOR
04 INSTALL SIDE BRACKET
A.
B.
routing cut-outs
C.
2.
Use the provided airow cover for
optimal airow. When used, the
airow will be closed off.
PRO TIP
1.
3.
THUMB SCREW 1x
REMOVE
1 2
3