60
Phantom Ultrahigh-speed Camera Manual
selected the cines you want to save, click ‘OK.’ In the
subsequent save dialog, navigate to the folder where you
wish to save the clips, and select the Cine Raw file format.
Choose a name for the clips and click the ‘Save’ button.
Erasing a CineMag IV
A CineMag IV can be erased via the Phantom PCC and
PVP software from the camera or CineStation IV.
In PCC software, navigate to the ‘Live>Flash Memory’
menu and click the ‘Erase’ button. Confirm that you wish
to delete all clips.
In PVP software, simply tap the ‘Erase All’ button, and
confirm. Erase progress is indicated on the video OSD,
on the camera screen, and by a progress bar in the
software.
Erase Protection
Once complete, all data on the CineMag IV will be erased,
and the CineMag will be ready for recording again right
away.
In order to protect the contents, there is a tiny erase
protect switch on the front of the CineMag IV. When
locked, the CineMag can be recorded to, but not erased.
If you find it impossible to erase the CineMag check that
the erase protect switch is in the unlocked position.
‘_Flashcine#’ will be appended to the file name
of all batch-saved clips, where ‘#’ represents
the number of each take.
A 1TB CineMag IV will take about 2.5 minutes
to erase, and a 2TB CineMag IV will take up to
5 minutes to erase.
To Next Page
Loading...
Need help?
General
