Manual Tablet Hardness Testing Instrument - Type PTB 111E
29-02840_01-2011E Page 3 of 4
PHARMA TEST AG +49 6182 9532-600
Siemensstrasse 5 +49 6182 9532-650
D-63512 Hainburg (GER) email@pharma-test.de
www.pharma-test.com
The PTB 111E Tablet Test Instrument offers:
¾ Use automatic re-start facility to speed up the testing sequence
¾ Documentation of all results using a separate Matrix or PCL Printer
¾ OQ and Calibration program for the measurement station
¾ Dual Point Calibration for the hardness test stations
¾ Multiple Point Validation for the hardness test stations
¾ Programmable print-out of force increase curve
¾ Data transfer via RS-232 interface
¾ Adjustable force control for hardness testing, select either linear force or linear speed
increase
¾ Hardness testing in compliance with the EP <2.9.8> and USP <1217>
Pharmacopoeia
¾ Test program for soft gelatine capsule testing
¾ Only hardness testing instrument in the market which offers unique adjustment
facilities of force increase and breaking detection force rates to meet any upcoming
monograph.
¾ Use calibration and validation program and report results.
Testing Tension Strength of Oblong and Caplets
The specially designed sample holder and force jaw is
suitable to be used in the PTB 111E Testing Instrument. It
is designed to test the tension strength at the break line of
shaped and also round tablets
Technical Data
Display: LED Display for No. of samples and hardness results
Keyboard: Numerical and function keys
Hardness: 5.0 - approx. 300 N (Newton), also 500N option
available
Accuracy: better 1N
Resolution: 300N = 0.0741N - 500N = 0.1482N
Measuring units: Thickness and diameter selectable in either mm
(Millimetre)or IN (Inches)
Hardness Result: Print-out and display selectable in either Newton (N),
kilopond (kp) or Strong Cobb (Sc)
Force rate: Adjustable for linear force increase or linear speed
increase
Range Linear Force Increase: 5.00 - 99.99 N/sec.
Accuracy: < 1%
Range Linear Speed Increase: 5 - 200.0 mm/minute
To Next Page
Loading...
