EasyManua.ls Logo

PHCC Pro Series 2200 User Manual

PHCC Pro Series 2200
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT: Even if you have the Pro Series backup sump pump
system installed by someone else, you must read and follow the
safety information contained in this manual. Failure to do so
could result in property damage, serious injury, or death.
A/C-D/C
Battery Backup
Sump Pump System
Important Safety Warnings and
Instructions
Electrical precautions 1
Battery preparation 1
Battery precautions 1
Introduction
Items included in system 2
Additional items needed 2
Replacement parts list 2
System specifications 2
Pump & Pipe
Installation Instructions
Installation options 3
Direct discharge to outside 4
Connection to existing discharge 5
Direct discharge for narrow sumps 6
Connection to existing discharge
for narrow sumps 7
Battery Instructions 8
Control Unit Connections
Positioning the float switch 9
Connecting the pump 9
Installing the battery fluid sensor 9
Connecting the battery 9
Connecting to AC power 10
Understanding the Warning
Lights and Alarms
Silencing the alarm 10
Battery fluid is low 10
Battery problem 11
Cleaning battery terminals 11
Replacing the battery 12
Power failure 13
Pump failure 13
Pump was activated 13
Replacing the pump 13
Battery power level 13
Testing the System
Testing the float switch 14
Parts & Service Information
Technical support 14
Troubleshooting Guide 14
Warranty 15
Instruction Manual & Safety Warnings
Table of Contents
Question and Answer IconNeed help?

Do you have a question about the PHCC Pro Series 2200 and is the answer not in the manual?

PHCC Pro Series 2200 Specifications

General IconGeneral
BrandPHCC
ModelPro Series 2200
CategoryWater Pump
LanguageEnglish

Summary

Important Safety Warnings & Instructions

Electrical Precautions

Risk of electrical and fire hazard. May result in death, serious injury, shock or burns.

Battery Preparation

Sulfuric acid can cause blindness or severe burns. Avoid contact with skin, eyes or clothing.

Battery Precautions

Explosive gases could cause serious injury or death. Cigarettes, flames or sparks could cause battery to explode.

Fluid Handling Warning

Do not use system to pump flammable or explosive fluids.

Introduction

System Components

Lists items included in the Pro Series Sump Pump System.

Required Supplies

Lists additional items needed for installation.

Replacement Parts

Lists part numbers for system components.

System Specifications

Details technical specifications like power, capacity, and dimensions.

Pump & Pipe Installation Instructions

Normal Sump Pit Installations

Diagrams for installing the pump in a normal sump pit.

Narrow Sump Pit Installations

Diagrams for installing the pump in narrow sump pits.

Installation A: Direct Discharge to Outside

Installation B: Connection to Existing Discharge Pipe

Installation C: Direct Discharge to Outside for Narrow Sump Pits

Installation D: Connection to Existing Discharge Pipe for Narrow Sump Pits

Battery Instructions

Standby Battery Recommendation

Recommends Pro Series batteries over automotive types.

Preparing the Pro Series Standby Battery

Step-by-step guide for filling a new battery with acid.

Battery Safety Precautions

Details dangers related to battery handling and acid.

Control Unit Connections

Positioning the Float Switch

How to mount the float switch for optimal operation.

Connecting the Pump

Steps to connect the pump's wires to the control unit.

Installing the Battery Fluid Sensor

Guide for installing the fluid sensor into the battery cap.

Connecting the Battery

Steps to connect the battery cables to the control unit.

Understanding the Warnings & Alarms

Silencing the Alarm During an Emergency

How to temporarily silence alarms.

Warning Alarm Summary

Table detailing warning lights, their causes, and silencing methods.

Battery Fluid is Low

Battery Problem

Battery Fluid Low Procedure

Steps to add distilled water when battery fluid is low.

Battery Problem Indicators

Explains the "Battery problem" light and alarm.

To Clean the Battery Terminals and Cables

Replacing the Battery

Power Failure

Pump Failure

Pump Was Activated

Battery Power Level

Replacing the Pump

Troubleshooting Guide

Battery Fluid Low Remedies

Solutions for low battery fluid issues.

Battery Problem Remedies

Solutions for battery issues like corrosion or discharge.

Power Failure Remedies

Solutions for power failure alarms.

Pump Failure Remedies

Solutions for pump failure alarms.

Pump Was Activated Remedies

Solutions for the pump activation alarm.

Testing the Float Switch

Parts & Service Information

Limited Warranty

Related product manuals