a
b
c
c
Open your e3 carton and check that the
following bits and bobs are there
a. 2 x rear wheels
b. 1 x top handle (with wrist strap
attached)
c. 1 x main buggy
d. 1 x front wheel
e. 2 x bungs (attached to front of buggy)
– use when bumper bar is not attached
(push in silver buttons and remove).
f. 1 x clear backflap (for use in newborn
baby position)
check your bits
`
bobs
You will need
1 x scissors
1 x adult (or someone who follows
instructions!)
Now just follow steps one to six...
a
d
f
b
e
c
double kit accessory (see page 10)
This is often purchased with your e3
buggy; carton should contain the following
bits and bobs
a. 1 x double seat (on frame)
hinge kit contains
b. 1 x retaining strap (attached to top of
double seat frame)
c. 2 x hinges (R and L - R is as you stand
behind the seat with seat facing forward)
32
To Next Page
Loading...
