1. Take main buggy and lay flat (sunhood
down) as shown.
one: wheeling
`
dealing
2. Remove rear wheels from plastic bag
(discard bag immediately – it is a
suffocation hazard for children).
3. Use scissors to unwrap packaging
around wheels (discard unwanted
packaging).
4. Take one rear wheel and push in silver
button on silver wheel axle.
5. Hold silver button in while inserting
wheel axle into buggy frame. Line up
silver button so it pops out of hole
on frame.
6. Repeat for second rear wheel on
opposite side (wheels work on
either side).
32
To Next Page
Loading...
