`
`
a
b
three:
up
`
running
1. Turn buggy over onto 3 wheels.
2. Pull up rear frame
.
(Note: For double buggy do not lift frame using double
seat as you may damage hinges.)
3
.
Pull up until you hear a resounding ‘click’.
Ensure that locks are engaged. Seat
should now be firmly in place.
Make sure children are clear of buggy before
folding, unfolding or adjusting the buggy. Watch
fingers - injury may result.
5
4
to fold
1
.
Press levers
‘a’ and
‘b’ (autolocks) on
either side at bottom of frame seat
with
fingers whi
lst holding fr
ame with
palms
of hands
. (UK - press lever
‘b’ and pull
lever
‘
a’).
2.
Let handle drop down,
lift buggy by
cross bar (parallel to bumper bar)
‘c’;
front wheel (swivel) folds under frame.
3. Attach webbing under footwell
around frame and attach wrist strap
(once handle on) around front wheel
to help hold buggy folded (
use
snap fasteners)
.
4.
Ensure levers
‘a’
and ‘b’ (autolocks) are
properly engaged
(as above).
Ensure that you hold the main
frame of the buggy when lifting in
and out of car (as shown).
c
To Next Page
Loading...
