EasyManua.ls Logo

Philco HLS78D-I - User Manual

Philco HLS78D-I
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LED COLOUR TV
MAINTENANCE MANUAL
MODEL: HLS78D-I CHASSISMSD6486
(take PCB for example:JUC7.820. 00192431-1)
Please read this manual carefully before maintenance

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Philco HLS78D-I and is the answer not in the manual?

Summary

Chapter 1 Safety and Notes

1-1 Installation Notes

Precautions for handling and installing the LED screen, avoiding scratches and impacts.

1-2 Operation and Usage Points

Guidelines for operating and using the TV safely, including unplugging power before moving.

1-3 Storage Notes

Conditions for storing the TV, specifying temperature and humidity limits to prevent damage.

1-4 Dismantling Notes

Precautions to take when dismantling the TV, focusing on screw positions and cable directions.

1-5 High-Voltage Warning

Warning about high voltage present in the power supply board and the risk of electric shock.

Chapter 2 Whole Machine Standard and Terminal Functions

2-1 Basic Standard

Technical specifications and terminal functions of the TV, covering panel details and interfaces.

2-2 Terminal Introduction and Photos

Visual guide to the TV's input/output terminals, showing their locations and types.

Chapter 3 Main Chip Functions and Power Supply

3-1 Main IC and Functions of HLS78 D-I

Details the main integrated circuits and their roles in the HLS78D-I model.

3-2 Component Pin Descriptions and Power Conditions

Describes pinouts, functions, and operating power conditions for various key components.

3-3 Power Supply Introduction

General overview of the TV's power supply system, including its AC input and outputs.

Chapter 4 MSD6486 Power Block Diagram and System Details

4-1 MSD6486 Power Block Diagram

Block diagram illustrating the power distribution for the MSD6486 chipset.

4-2 Power Supply System

Details about the TV's power supply system and its various output voltages.

4-2-1 Pin Voltage of Voltage Adjusters

Lists pin voltages for voltage adjustment components on the main board.

4-2-2 Interface Definition

Identifies and defines the various interfaces found on the main board.

Chapter 5 Software Upgrade Instructions

Software Upgrade Method: USB Upgrade

Step-by-step guide for upgrading TV software using a USB drive.

Chapter 6 Classical Accident Maintenance and Examples

6-1 No Boot Troubleshooting

Diagnostic approach for a TV that does not power on.

6-2 Common Problems and Solutions

Table of common TV issues and their corresponding solutions.

6-3 Troubleshooting: Power Supply and Display Issues

Flowcharts for diagnosing power supply, black screen, white screen, and abnormal screen problems.

6-3 Troubleshooting: Audio and Function Issues

Diagnostic procedures for audio problems and TV/HDMI/YPBPR/AV/USB function failures.

Chapter 7 Factory Mode Parameter Settings

7-1 Enter Factory Mode

Instructions on how to access the TV's factory mode using the remote control.

7-2 List of Factory Mode Parameters

Reference list of factory mode settings and parameters for adjustments.

Chapter 8 HLS78 D-I Module Circuit Schematic Instructions

8-1 NAND FLASH Clearing and Parameter Setup

Procedures for clearing NAND FLASH and setting parameters after software upgrades.

8-2 Channel;Source Verification

Verification steps to ensure proper function of channels and sources.

8-3 Circuit Schematic Diagram Availability

Information on where to find the circuit schematic diagram.

Appendix: Circuit Schematic Diagrams

Philco HLS78D-I Specifications

General IconGeneral
Display TechnologyLED
Screen Size32 inches
HDMI Ports2
USB Ports1
Sound Output10W
Resolution1366 x 768