There are 2 ways to remove collected water:
Use the bucket.
When the bucket is removed,
the unit will shut off. Empty and replace the
bucket.
NOTES:
■
■
Use a hose.
Water will automatically
flow into a floor drain by attaching a
14mm inner diameter hose (not included).
1.
2.
3.
Always make sure the water bucket is locked into place on the dehumidifier.
Using the dehumidifier.
Removing Collected Water
NOTE:Hoold bucket with
both hands when emptying.
Open the drain cover on the side of
the unit.
Thread the drain tie-in (supplied) onto
the nozzle.
Connect the hose to the drain tie-in.and
lead it to the floor drain.
Do not remove the bucket while the unit
is in operation or it has just stopped.
The bucket must be in place and securely
seated for the dehumidifier to operate.
5
To Next Page
Loading...
