Philco PH2313IC - Page 19

20
unit.
Heating zones of the
same side (Such as
the first and the
second zone ) would
display “u” .
The power board
and the display
board connected
failure;
Stop using the induction hob, switch
off the main power and contact
Customer Service.
The display board
of communicate
part is damaged.
The Main board is
damaged.
Fan motor sounds
abnormal.
The fan motor is
damaged.
Stop using the induction hob, switch
off the main power and contact
Customer Service.
The above are the judgment and inspection of common failures. The final
cause is subject to further inspection by authorized Technician.