Need help?Do you have a question about the Philips AVENT SCF260/37 and is the answer not in the manual?
Prepare warmer, add water, plug in, and switch on the unit.
Select milk/food mode, temperature, and desired volume.
Start the warming cycle and understand completion signals.
Safely remove heated contents and check feed temperature.
Unplug, empty water, and clean the warmer after use.
Unplug, cool, wipe inside/outside with a damp cloth. Avoid abrasives.
Mix citric acid or vinegar solution and run/leave in warmer to remove limescale.
Lists crucial safety precautions for operation, heating, and use.
Addresses food or milk not being warm enough after the cycle.
Solutions for display not lighting up, flashing symbols, or unexpected beeping.
Guidance on stopping, starting, or resetting cycles when the lid is opened.
Guidance on selecting the correct volume for frozen food.
Prepare warmer, add water, plug in, and switch on the unit.
Select milk/food mode, temperature, and desired volume.
Start the warming cycle and understand completion signals.
Safely remove heated contents and check feed temperature.
Unplug, empty water, and clean the warmer after use.
Unplug, cool, wipe inside/outside with a damp cloth. Avoid abrasives.
Mix citric acid or vinegar solution and run/leave in warmer to remove limescale.
Lists crucial safety precautions for operation, heating, and use.
Addresses food or milk not being warm enough after the cycle.
Solutions for display not lighting up, flashing symbols, or unexpected beeping.
Guidance on stopping, starting, or resetting cycles when the lid is opened.
Guidance on selecting the correct volume for frozen food.
General| Brand | Philips AVENT |
|---|---|
| Model | SCF260/37 |
| Category | Bottle Warmer |
| Language | English |
To Next Page
