3) Press the or button until the desired language is highlighted.
4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN
CONTROLS will be highlighted...
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to continue to INPUT SIGNAL SELECTION, press the
button until INPUT
SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL
SELECTION.
. . . to exit completely, press the button
file:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (3 of 27) [2002/7/7 ?? 11:16:21]
To Next Page
Loading...
