16
• [Time]: Sets the time to switch on
the TV.
• [Programme no.]: Selects the
channel or the connected device.
4 Press MENU to exit.
Tip
Select • [On timer] > [Activate] > [Off] to
disable this feature.
When
• [On timer] is switched off, only
[Activate] option is available.
Use TV locks
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change your PIN code
1 Press MENU.
2 Press to select [Features] > [Set
code] / [Change code].
The » [Set code] / [Change code] menu
appears.
3 Enter your code using the Numeric
buttons.
Follow the on-screen instructions to »
create or change your PIN code.
Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
1 Press MENU.
2 Press to select [Features] > [TV
lock].
You are prompted to enter your PIN »
code.
Use timers
You can set timers to switch the TV to standby
at a specified time.
Tip
Set the TV clock before you use timers. •
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined period of time.
Tip
You can switch off your TV earlier or reset the •
sleep timer during the countdown.
1 Press MENU.
2 Press to select [Features] >
[Sleep timer].
The » [Sleep timer] menu appears.
3 Press to select a value between zero
and 180 minutes.
The sleep timer can be set in steps of »
five minutes. If set to zero, the sleep
timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the »
specified time.
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
specific channel at a specified time.
1 Press MENU.
2 Press to select [Features] > [On
timer].
3 Press to enter the [On timer] menu.
• [Activate]: Selects how often the TV
is switched on.
EN
To Next Page
Loading...
