BLOCK CHANNELS
20
A
fter your personal access code has been
set (see previous page), you are now
eady to select the channels or the A/V
nputs you want to block out or censor.
Once you’ve entered your access code and
he AutoLock™ features are displayed on
he screen:
1
Press the CURSOR UP 3 or
DOWN 4 buttons until the
words BLOCK CHANNELS are
highlighted.
2
Press the CURSOR RIGHT 2
button to turn blocking ON or
OFF for that channel. When ON is
selected the channel will be
blocked.
3
Press the CH + or CH – button
to select other channels you wish
to block. Repeat step 9 to block
the new channel.
4
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
NOTE: If you ever forget your code,
he 0, 7, 1, 1 code is the factory default
nd can be used to enter and create a
ew access code.
To Next Page
Loading...
