To Next PageTo Next Page
Need help?Do you have a question about the Philips 20PV230/07 and is the answer not in the manual?
General| Brand | Philips |
|---|---|
| Model | 20PV230/07 |
| Category | TV VCR Combo |
| Language | English |
Covers number buttons, standby, mute, playback, stop, and forward/rewind functions.
Covers Menu, Select, arrow keys, OK, Index, and Still buttons for navigation.
Covers Teletext, Timer, Smart, Yellow, and Sleep buttons for specific features.
Describes physical buttons on the front of the unit for power, volume, and playback.
Details input/output connections like AV, SCART, Aerial, and Headphones.
Explains the meaning of the standby and record indicator lights on the unit.
Crucial safety warnings regarding voltage, ventilation, liquids, and environmental conditions.
Information about improving TV signal reception and sources of interference.
Lists key electrical, physical, and performance specifications of the TV-Video Combi.
Outlines included accessories and explains the emergency interrupt function for safe operation.
Describes automatic time setting (SmartClock) and picture enhancement features.
Covers Plug and Play, Video Plus+, and Tuners Record & View functionalities.
Explains Long Play, NTSC playback, and the Sleep Timer function.
Details UK plug suitability, fuse replacement, and mains cable wiring guidance.
Step-by-step instructions for inserting batteries into the remote control.
Guide on connecting the mains cable and identifying wire colors for proper connection.
Instructions for inserting the aerial plug and connecting the main power cable.
How to connect decoders, satellite receivers, or camcorders via the SCART socket.
Guides through the automatic channel search process for initial setup.
Explains how to assign a decoder to a specific TV channel.
Details the manual process for finding TV channels.
Instructions for connecting and receiving channels from a satellite receiver.
Overview of customizable installation settings for the TV-Video Combi.
How to perform an automatic scan for all available TV channels.
How to organize, reassign, or remove TV channels from memory.
Procedure to manually set the current year, month, date, and time.
How to automatically set time and date using Teletext/PDC information.
How to select TV channels via aerial, SCART, or front AV inputs.
Adjusting audio volume using remote or unit buttons, including mute function.
Customizing picture parameters like brightness, contrast, colour, and sharpness.
Setting the default volume level when the TV-Video Combi is turned on.
How to access and display Teletext pages using the built-in decoder.
Using special Teletext features like font enlargement and sub-page selection.
Programming the TV-Video Combi to switch on automatically at a set time.
Setting the TV-Video Combi to switch off automatically after a specified period.
Advice on switching the set on/off, standby mode, and power consumption.
Overview of the On-Screen Display (OSD) menus and basic navigation controls.
How to insert and play a pre-recorded VHS cassette.
Instructions for playing back cassettes recorded in the NTSC format.
Using tape position indicator and picture search for locating specific parts of a tape.
How to display a still image and search tape by winding.
Using Instant View during winding and searching by index code.
Adjusting tracking to improve playback picture quality.
How to start and stop manual recordings manually.
Setting recordings to stop automatically using OTR.
How to use the write-protect tab on cassettes to prevent accidental erasure.
Joining individual recordings seamlessly without flickering.
Choosing between Standard Play and Long Play recording speeds.
Using station signals to control recording start and end times.
Recording based on PlusCode numbers found in TV guides.
Setting recordings manually without using VIDEO Plus+ codes.
How to review or modify existing programmed recording settings.
Deleting programmed recording entries from the timer.
Blocking front panel buttons to prevent unintended use.
Turning on-screen display (OSD) information on or off.
Setting the cassette to automatically rewind and replay upon reaching the end.
Basic checks for power, remote, and parental control issues.
Solutions for no picture, poor quality playback, and cassette jamming.
Diagnosing problems with manual or programmed recording and Smart Clock.
Definitions for terms like OSD, Scart, OTR, Standby, and TELETEXT.
