Philips 221V8 User Manual

5
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
220V8/220V8L/220V8L5/220V8LL
* VGA
Power
Start
Quick
Register your product and get support at
www.philips.com/welcome
* DVI
(220V8/220V8L5)
V Line
220V8
221i8/221V8/221V8L/221V8LD/221V8LS/
221V8A/222V8LA
* VGA
Power
* HDMI
* Audio cable
(221V8A/222V8LA)
* DP
(222V8LA)
Start
Quick
Register your product and get support at
www.philips.com/welcome
* DVI
(221V8LD)
V Line/i Line
221V8/222V8/221i8
*Different according to region.
Install the base
1. Place the monitor face down on
soft and smooth surface taking care
to avoid scratching or damaging
the screen. Attach/Slide the base
column with the monitor until it
clicks into position.
2. Hold the monitor base stand with
both hands and firmly insert the
base stand into the base column.

Philips 221V8 Specifications

General

Screen Size	21.5 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	VA
Refresh Rate	75 Hz
Aspect Ratio	16:9
Brightness	250 cd/m²
Response Time	4 ms (GtG)
Viewing Angle	178° (H) / 178° (V)
VESA Mount	100 x 100 mm
Connectivity	HDMI, VGA
Contrast Ratio	3000:1 (typical)