Philips 245E1S - Page 8

6
2. Setting up the monitor
Install base stand
245E1S/241E1S
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. (1) Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
2
1
3
245E1
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. (1) Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(2) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
1
2