Philips 275V8 - Page 8

6
2. Setting up the monitor
Connecting to your PC
1 2
3
4
6
5
1
AC power input
2
HDMI 1 input
3
HDMI 2 input
4
DisplayPort input
5
Audio output
6
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
ofthemonitorrmly.
2. Turnoyourcomputerandunplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.