Philips 27E1N1600AE - Setting up the Monitor; Installation

5
2. Setting up the
monitor
2.1 Installation
1
Package contents
www.philips.com/welcome
Quick Start
24E1N1300AE
27E1N1300AE
27E1N1600AE
1000Series
Monitor
Register your product and get support at
*HDMI
Power
*USB C-C
*USB C-C/A
*USB C-A
Screwdriver
*Dierent according to region
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the
VESA mount area.
(2) Use a screwdriver to tighten the
assembly screws, and secure the
stand to the monitor tightly.
(3) Gently attach the base to the
stand. Use your ngers to tighten
the screw located at the bottom
of the base, and secure the base
to the stand tightly.
2
1
3
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.