Philips 27E1N5500E - Setting up the Monitor; Installation

5
2. Setting up the
monitor
2.1 Installation
1
Package contents
*DP *HDMI
Register your product and get support at www.philips.com/welcome
Quick start
5000 Series
Monitor
27E1N5500E
Power
*Different according to region
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
4
1
2
3
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.