Explanation of CSM Display Screen
The following information is displayed on screen:
• Text ”CSM“ in upper right hand corner
• Line number for every line (to make CSM language independent)
• To view multiple CSM pages (if available), use the Channel Up or Channel Down keys
• For more information on lines 1, 2, and 3, see SAM section ”Explanation of Display“
• Line 1 displays the run timer and the software identification, cluster, and version
• Line 2 displays the error buffer contents (the word ”error“ is not used on this screen; instead, ”codes“ is used)
• Line 3 displays the option code information
• Line 4 displays SYS: (This is not used)
• Lines 4 through 7 display information on active service unfriendly modes
• Line 4 also displays the text ”HOSP“ if hospitality mode is active
• Line 5 displays the text ”SLEEP“ if the sleep timer is active
• Line 5 also displays the text ”NOT TUNED“ if no television station is tuned
• Line 6 displays the text ”LOCK“ if one or more channels or presets is locked via child lock
• Line 6 also displays the text ”SKIPPED“ if any channels are skipped
• Line 7 displays the text ”TIMER“ if the ”on“ timer is active
To Next Page
Loading...
