Philips 27M1N5500ZA - Page 11

9
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is re-
quired for MPRT.
• AMD FreeSync Premium and MPRT
cannot be enabled simultaneously.
• MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on.
• MPRT is gaming-optimized mode.
Turn on MPRT may cause noticeable
screen ickering. It is recommended
to turn o when you are not using
the gaming function.
• This Philips monitor is certied with
AMD FreeSync™. The technology
is used to match the refresh rate of
the monitor to the graphic cards.
Providing the smoothest gaming ex-
perience by reducing or eliminating
judder, tearing, and stuttering.
Enabling Adaptive-Sync from
the On-Screen Display menu will
automatically activate the appro-
priate technology depending on
the graphics card installed in your
computer:
• If using an AMD Radeon graphics
card, FreeSync will be enabled.
• Go to www.philips.com/support
to download the latest version of
leaet to get more information on
FreeSync certication.
3
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 x 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 2560 x
1440 for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
4
Physical Function
Tilt
20°
-5°
Swivel
-45°
+45°