No Power
• Check the TV power cord. Unplug Ihe TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again,
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
• Check anlenna connections. Are they properly secured to the
TV's ANT 75_? plug?
• Check the TUNER MODE control for the correct tuner set-
ting.
• Try running the Auto Program feature to find all available
channels.
• Press the AV button on the remote to make sure the correct
signal source is selected (FP, ONT or Current Channel).
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on the remote control,
• If you're atlempting to hook up auxiliary equipment, check
the audio jack connections localed on the front of the TV.
TV Only Produces MONO Sound
• If using a cable box with RF only type connections, the signal
coming from the cable box will be produced in MONO only:
• Check Sound control setting, Change setting to Stereo.
Remote Does Not Work
• Check the ba/leries, if necessary, replace lhem wilh AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
• Clean the remole control and the remote control sensor win-
dow on the TV,
• Check the TV power cord, Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
• Be sure the fuse is not blown on the AC power strip, if one is
being used,
• Check to be sure the TV outlet is not on a wall switch,
TV Displays Wrong Channel or No Channels Above 13
• Repeal channel selection,
• Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV's memory;
• Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels,
34
To Next Page
Loading...
