PBS Mode Functions4.
This paragraph describes the functionality of each item in the PBS Mode Setup menu.
Layer 1 Layer 2 Layer 3
PBS Mode Off/On/Install
Application “Business/Monitor”
“Hotel/Hospital”
Switch On Switch On Volume Last Status/User Defined
Max Volume 0 ~ 100
Switch On Channel Last Status/User Defined
Power On On/Standby/Last Status
Display Message Off/On
Welcome Message Line1/Line2/Clear
Control Local KB Lock Off/On/All
RC Lock Off/On
OSD Display Off/On
High Security Mode Off/On
Blank Channel Channel list
Channel Table Off/On
Add current channel to Pay
TV ring
R0/R1/R2
Smart RC Off/On
Smartloader to TV Load
TV to Smartloader Load
Store Confirm
PBS MODE
OFF This disables the PBS Mode. When PBS Mode is OFF.
$ The TV operates as a normal (consumer) TV
ON This enables the PBS Mode. When PBS Mode is ON.
$ All settings of the PBS Mode Setup menu are in effect.
INSTALL $ A special transient state, to allow the channel table setting to be used during
auto installation
APPLICATION
BUSINESS/MONITOR
When application is BUSINESS/MONITOR, the below functions behaves as per normal consumer.
$ Last status is enabled.
$ The full Consumer Menu can be accessed and changes are stored.
$ Child lock and timers are enabled.
To Next Page
Loading...
