Service Modes, Error Codes, and Fault Finding
EN 17TPB1.1HU LA 5.
2010-Nov-05
Figure 5-5 Example of SAM - 1 -
With the Left/Right cursor keys to select Quality-> Whitepoint
alignment, the set will enter the other factory mode display.
How to Navigate
With the up/down cursor keys can be used to navigate through
the menu, while with the Left/Right cursor the values can be
changed.
How to EXIT
Choose “EXIT”, and press the right cursor button, then press
the back button.
Figure 5-6 Example of SAM - 2 -
Table 5-1 Contents of SAM
18880_201_101015.eps
101021
18880_202_101015.eps
101102
Action Items Range
Default Value
Description32" 37" 42"
Brand PHILIPS PHILIPS PHILIPS Brand customer
Date 20100825 20100729 20100825 Released software date
Model name 32HFL5662L/F7 37HFL5682L/F7 42HFL5682L/F7 Project model name. with the Left/Right cursor the project model name
can be changed
Speaker ID111Speaker ID selected
Serial number BZ1A1031003012 BZ1A1031003011 BZ1A1031003010 Project serial number. With the up/down cursor keys can be used to
navigate through the menu, while with the Left/Right cursor the values
can be changed at the 1, 2 and 4 characters, use the numeric keys at
the remote control for the other numeric values directly.
ScalerType RTD2472FD RTD2482FD RTD2482FD Scaler IC type
SoftwareVer LGD32_RTD2472FDV1.01 LGD37_RTD2482FDV1.00 LGD42_RTD2482FDV1.01 Software version
EEPromVer BEData.1.00.20100825 BEData.1.00.20100729 BEData.1.00.20100825 EEPROM software version
Panel Type 932228014682 932227710682 932227711682 Panel indentification by means of 12NC
Panel Resolution 1366 × 768 1920 × 1080 1920 × 1080 Panel resolution in pixels
Panel Size 32 37 42 Panel diagonal size in Inch
Panel AspectRatio 16 : 9 16 : 9 16 : 9 Panel aspect ratio
Brightness 50 50 50 Brightness adjustment
Contrast 50 50 50 Contrast adjustment
Sharpness 25 25 25 Sharpness adjustment
Color505050Colour adjustment
Hue505050Hue adjustment
ColorTemp COOL COOL COOL Colour temperature setting (NORMAL, COOL, WARM)
ScalerGain 0 - 255 R 123 G 126 B128 R 122 G 124 B128 R 121 G 121 B128 Back-end scaler RGB gain NVM hasYPbPr NORMAL, WARM, COOL,
CUSTOMER four settings. Other sources use offset with hardcoding
ScalerOffset 0 - 255 R 128 G 128 B 128 R 128 G 128 B 128 R 128 G 128 B 128 Back-end scaler RGB offset NVM hasYPbPr NORMAL, WARM, COOL,
CUSTOMER four settings. Other source use offset with hardcoding
BurnIn Off Off Off Reset the set to standard manufacturer's settings
EEProm Init OK OK OK Reset the EEPROM to initial mode
BurnIn Time 00000 hours 00000 hours 00000 hours Total burn-in time
Total Time 00000 hours 00000 hours 00000 hours Total running time
Reset OK OK OK Reset the set to initial mode
HDMIRes 1366 × 768 1920 × 1080 1920 × 1080 Select the resolution
HDMIFreq AUTO AUTO AUTO Select the HDMI frequency
Volume 43 43 43 Select the volume value
Exit Press
right
cursor
Exit from factory mode
To Next Page
Loading...
