6-1 A17FY_A17FX INT
HOW TO INITIALIZE THE LCD TV
The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to
select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
Note: Disconnect any device from the USB Port
before you conduct on this procedure.
1. Turn the power on.
2. Enter the service mode.
3. Press [RC5 GUEST] button on the set up remote
control unit.
4. Press [RECALL/INFO] button on the set up remote
control unit to initialize the LCD television.
5. After confirming that “INITIALIZED FINISH”
appears on the screen, unplug the AC cord.
Note: To cancel the service mode, press [ ] button
on the set up remote control unit.
To Next Page
Loading...
