Philips 32PFH4100 - Blu-Ray Disc Player; DVD Player; Game Console

format
.
3. Select
Multichannel
or
Stereo
.
4. Press

, repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out leveling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
To level the difference in volume . . .
1. Press

and select
Setup
and press
OK
.
2. Select
TV settings
>
Sound
>
Advanced
>
Audio out
leveling
.
3. If the volume difference is large, select
More
. If the volume
difference is small, select
Less
.
Press

, repeatedly if necessary, to close the menu.
Audio Out leveling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted.
1. Press

and select
Setup
and press
OK.
2. Select
TV settings
>
Sound
>
Advanced
>
Audio out
format.
No sound
If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
- Check if you connected the HDMI cable to a
HDMI
ARC
connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
- Check if the
HDMI ARC
setting on the TV is switched
On
.
Go to

>
Setup
>
TV settings
>
Sound
>
Advanced
>
HDMI
1 -ARC
.
3.6
Blu-ray Disc player
Use a
High speed HDMI
cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
3.7
DVD player
Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
If the DVD player is connected with HDMI and has EasyLink
CEC, you can operate the player with the TV remote control.
3.8
Game console
HDMI
For best quality, connect the game console with an High speed
HDMI cable to the TV
10