22
4 Press to select [Skip channel], then
press
to enter.
5 Press to select [Yes], then press OK
to skip current channel.
The selected channel is skipped when »
you press P +/- on your remote
control or view from the channel grid.
6 Repeat the previous steps to skip more
channels.
Tip
Press the • Numeric buttons on the remote
control to access the skipped channel.
To access the skipped channel, repeat steps
•
1-5 and select [No] to restore.
Rename channels
You can rename channels. The name appears
when you select the channel.
1 When watching TV, press OK to display
the channel grid.
2 Select the channel to rename.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Rename channel],
then press OK.
A text input box appears. »
5 Press to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish
renaming channels.
Tip
The device name can be up to six characters •
long.
Press
• [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
5 Press OK to begin search.
If a channel is unavailable at the »
selected frequency, the system searches
for the next available channel.
6 Press BACK when the new channel is
found.
7 Press to select [Store as new
channel] to store the new channel under
a new channel number.
8 Press to enter [Store as new channel].
9 Select [OK], then press OK to store the
new channel.
10 Press MENU to exit.
Step 3 Fine-tune analogue channels
1 Press MENU.
2 Press to select [Setup] > [Installation]
> [Channel installation] > [Analogue:
Manual].
The » [Analogue: Manual] menu appears.
3 Press to select [Fine-tune], then
press
to enter.
4 Press to adjust frequency.
5 Press OK to confirm.
6 Press to select [Store current
channel] to store channel number.
7 Press to enter [Store current channel].
8 Select [OK], then press OK to store
current channel.
9 Press MENU to exit.
Skip channels
1 When watching TV, switch to the channel
you want to skip.
2 Press MENU.
3 Press to select[Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
EN
To Next Page
Loading...
