19
Use timers
You can set timers to switch the TV to standby
at a specified time.
Tip
Set the TV clock before you use timers. •
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined period of time.
Tip
You can switch off your TV earlier or reset the •
sleep timer during the countdown.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Sleep timer].
The » [Sleep timer] menu appears.
3 Press to select a value between zero
and 180 minutes.
The sleep timer can be set in steps of »
five minutes. If set to zero, the sleep
timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the »
specified time.
Change the clock mode
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Auto clock
mode].
3 Press to select [Automatic] or
[Manual].
4 Press OK to confirm.
Change the time zone
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Time zone].
3 Press to select your time zone.
4 Press OK to confirm.
Note
This option is only available if you select • [Auto
clock mode] > [Manual] (in countries with
clock transmission data).
Use daylight saving
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Daylight
saving].
3 Press OK or to enter [Daylight saving].
4 Press to select [Standard time] or
[Daylight saving time].
5 Press OK to confirm.
Note
This option is only available if you select •
[Auto clock mode] > [Manual].
English
EN
To Next Page
Loading...
