Need help?Do you have a question about the Philips 32PFL3403D and is the answer not in the manual?
General| Operating temperature (T-T) | 5 - 40 °C |
|---|---|
| On/off switch | Yes |
| Product color | Black |
| Rollable display | No |
| Panel mounting interface | 200 x 200 mm |
| Comb filter | 3D |
| Screen shape | Flat |
| Response time | 8 ms |
| Display diagonal | 31.5 \ |
| Display brightness | 500 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | - |
| Supported video modes | 480i, 480p, 720p, 1080i |
| Contrast ratio (dynamic) | 26000:1 |
| Contrast ratio (typical) | 1200:1 |
| Display diagonal (metric) | 81 cm |
| Screen format adjustments | 4:3, 14:9, 16:9, Zoom |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 480, 800 x 600 (SVGA), 1024 x 768 (XGA), 1360 x 768 (WXGA) |
| AC input voltage | 90-110 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 150 W |
| Audio decoders | Dolby Digital AC3 |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| Operating system installed | Not supported |
| Cables included | AC |
| HDMI version | 1.3 |
| Audio (L/R) in | 3 |
| RF connector type | F |
| Composite video in | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Consumer Electronics Control (CEC) | EasyLink |
| Supported TV bands | Hyperband, S Band, UHF, VHF |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
Weight and Dimensions| Depth (with stand) | 220.9 mm |
|---|---|
| Width (with stand) | 810.2 mm |
| Height (with stand) | 591.8 mm |
| Weight (with stand) | 13970.6 g |
| Depth (without stand) | 91.4 mm |
| Height (without stand) | 543.5 mm |
| Weight (without stand) | 10976.9 g |
To Next Page
